3D打印:修订间差异

来自工场百科
(创建页面,内容为“== Prusa i3 配置文件 == <nowiki> # generated by Slic3r 1.2.9 on Thu Feb 23 21:19:47 2017 avoid_crossing_perimeters = 0 bed_shape = 0x0,200x0,200x200,0x200 bed_te...”)
 
 
(未显示同一用户的2个中间版本)
第1行: 第1行:
== Prusa i3 配置文件 ==
== Prusa i3 配置文件 ==
<nowiki>
 
<nowiki>
# generated by Slic3r 1.2.9 on Thu Feb 23 21:19:47 2017
# generated by Slic3r 1.2.9 on Thu Feb 23 21:19:47 2017
avoid_crossing_perimeters = 0
avoid_crossing_perimeters = 0
第131行: 第132行:
wipe = 0
wipe = 0
xy_size_compensation = 0
xy_size_compensation = 0
z_offset = 1.6
z_offset = 1.6</nowiki>
</nowiki>

2017年2月23日 (四) 21:26的最新版本

Prusa i3 配置文件

# generated by Slic3r 1.2.9 on Thu Feb 23 21:19:47 2017
avoid_crossing_perimeters = 0
bed_shape = 0x0,200x0,200x200,0x200
bed_temperature = 0
before_layer_gcode = 
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM190 S0; turn off bed temperature
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 80%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 0.9
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #C51BD6
filament_diameter = 1.75
fill_angle = 45
fill_density = 80%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 0
first_layer_height = 0.4
first_layer_speed = 50%
first_layer_temperature = 205
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 2
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 40%
infill_speed = 80
interface_shells = 0
layer_gcode = 
layer_height = 0.2
max_fan_speed = 80
max_print_speed = 80
max_volumetric_speed = 0
min_fan_speed = 40
min_print_speed = 5
min_skirt_length = 0
notes = 
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 3
post_process = 
pressure_advance = 0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0.3
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_position = nearest
skirt_distance = 2
skirt_height = 1
skirts = 2
slowdown_below_layer_time = 30
small_perimeter_speed = 35
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\nM107; turn off fan
support_material = 1
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 10
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 45
temperature = 205
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 160
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 1.6