跳转到内容
主菜单
主菜单
移至侧栏
隐藏
导航
首页
工场FAQ
工场大事记
工场文化
工场设备
正版软件
工场云服务
及时更新我
最近更改
如何使用Wiki?
工场百科
搜索
搜索
登录
个人工具
登录
查看“3D打印”的源代码
页面
讨论
大陆简体
阅读
查看源代码
查看历史
工具
工具
移至侧栏
隐藏
操作
阅读
查看源代码
查看历史
常规
链入页面
相关更改
特殊页面
页面信息
←
3D打印
因为以下原因,您没有权限编辑本页:
您请求的操作仅限属于该用户组的用户执行:
用户
您可以查看和复制此页面的源代码。
== Prusa i3 配置文件 == <code> # generated by Slic3r 1.2.9 on Thu Feb 23 21:19:47 2017 avoid_crossing_perimeters = 0 bed_shape = 0x0,200x0,200x200,0x200 bed_temperature = 0 before_layer_gcode = bottom_solid_layers = 3 bridge_acceleration = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 0 complete_objects = 0 cooling = 1 default_acceleration = 0 disable_fan_first_layers = 1 dont_support_bridges = 1 duplicate_distance = 6 end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\nM190 S0; turn off bed temperature external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 external_perimeter_speed = 80% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extruder_offset = 0x0 extrusion_axis = E extrusion_multiplier = 0.9 extrusion_width = 0 fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #C51BD6 filament_diameter = 1.75 fill_angle = 45 fill_density = 80% fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_bed_temperature = 0 first_layer_extrusion_width = 0 first_layer_height = 0.4 first_layer_speed = 50% first_layer_temperature = 205 gap_fill_speed = 20 gcode_arcs = 0 gcode_comments = 0 gcode_flavor = reprap infill_acceleration = 0 infill_every_layers = 2 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 40% infill_speed = 80 interface_shells = 0 layer_gcode = layer_height = 0.2 max_fan_speed = 80 max_print_speed = 80 max_volumetric_speed = 0 min_fan_speed = 40 min_print_speed = 5 min_skirt_length = 0 notes = nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 40 perimeters = 3 post_process = pressure_advance = 0 raft_layers = 0 resolution = 0 retract_before_travel = 2 retract_layer_change = 1 retract_length = 1 retract_length_toolchange = 10 retract_lift = 0.3 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 seam_position = nearest skirt_distance = 2 skirt_height = 1 skirts = 2 slowdown_below_layer_time = 30 small_perimeter_speed = 35 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\nM107; turn off fan support_material = 1 support_material_angle = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 10 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 45 temperature = 205 thin_walls = 1 threads = 2 toolchange_gcode = top_infill_extrusion_width = 0 top_solid_infill_speed = 50 top_solid_layers = 3 travel_speed = 160 use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 vibration_limit = 0 wipe = 0 xy_size_compensation = 0 z_offset = 1.6 </code>
返回
3D打印
。
开关有限宽度模式